p-Fluorophenyl chloroformate - Names and Identifiers
p-Fluorophenyl chloroformate - Physico-chemical Properties
Molecular Formula | C7H4ClFO2
|
Molar Mass | 174.56 |
Density | 1.329 g/mL at 25 °C (lit.) |
Boling Point | 190.2±23.0 °C(Predicted) |
Flash Point | 169°F |
Vapor Presure | 0.547mmHg at 25°C |
Appearance | Liquid |
Color | Clear slightly yellow |
Storage Condition | 2-8°C |
Refractive Index | n20/D 1.4933(lit.) |
p-Fluorophenyl chloroformate - Risk and Safety
Risk Codes | R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed.
R34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S27 - Take off immediately all contaminated clothing.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
UN IDs | UN 3277 6.1/PG 2 |
WGK Germany | 3 |
HS Code | 29159000 |
Hazard Note | Highly Toxic/Corrosive |
Hazard Class | 6.1(a) |
Packing Group | II |
p-Fluorophenyl chloroformate - Introduction
4-fluorophenyl chlorocarbonate(4-fluorophenyl chlorocarbonate) is an organic compound whose chemical formula is C7H4ClFO2. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: Colorless to light yellow liquid
-Solubility: Soluble in organic solvents such as dichloromethane and ethyl acetate
-Melting point:-10°C
-Boiling point: 110-113°C
-specific gravity: 1.397
Use:
- 4-fluorophenyl chlorocarbonate is an important intermediate in organic synthesis, commonly used in the synthesis of drugs and pesticides and other compounds
-It can also be used as a reagent for acylation and carbonylation reactions
Preparation Method:
- 4-fluorophenyl chlorocarbonate can be obtained by reacting fluorobenzoic acid with chloro formic anhydride
-Specific synthetic steps can refer to the relevant methods in the literature of organic synthetic chemistry
Safety Information:
- 4-fluorophenyl chlorocarbonate is an irritating compound that may irritate the eyes and skin
-During operation, appropriate safety measures need to be taken, such as wearing protective glasses and gloves
-It should be used in a well-ventilated place and avoid inhaling its vapor
-When storing and handling, you need to comply with chemical safety regulations and keep them away from ignition and oxidizing agents
Please note that this information is for informational purposes only. When using 4-fluorophenyl chlorocarbonate, be sure to follow the relevant safety handling and laboratory regulations.
Last Update:2024-04-09 15:17:57